Ford Kuga 2.0 TDCi 150hp chiptuning
2016 (2019) · Diesel · ECU: Delphi DCM6.1 / Delphi DCM3.5
Stage 1: +50 hp & +80 Nm
Engine ECU
Read methods
Available options
With an individually developed Stage 1 tuning file, the Ford Kuga 2.0 TDCi 150hp with 150 hp and 370 Nm gets 200 hp and 450 Nm – an increase of +50 hp (33%) and +80 Nm. The file is created by our tuning engineers for your exact software version on the Delphi DCM6.1 / Delphi DCM3.5 ECU and is delivered via our file service portal in 5–15 minutes. Options such as DPF OFF, DTC Removal, EGR OFF, FLAPS can be combined in the same file.
Values are guide values from our dyno and comparable vehicles. Actual results depend on condition, hardware and fuel quality. Use only where legally permitted.
Technical data
| Fuel | Diesel |
| Displacement | 1997 CC |
| Compression ratio | 16.7 : 1 |
| Bore × stroke | 85.0 X 88.0 mm |
| Engine code | T7MA / T7MB |
Other engines: Ford Kuga 2016 (2019)
Ready for the next level?
Create your free account on our file service portal and get 1 free credit to test – your first file is ready in minutes.